Our friends at RSPE Audio Solutions are putting on a PMC Listening Event with the award-winning PMC MB3-XBD and BB6-XBD Studio Monitors. Join special guest Peter Thomas, founder, visionary, and owner of PMC Speakers for the US launch PMC's latest active studio monitors.
During the event, there will also be presentations by key PMC users from the scoring and composing industry. Entry is limited, so go over to the sign up page at RSPE to book your place at this event.
More About The PMC MB3-XBD And BB6-XBD Active Monitors
The MB3-XBD And BB6-XBD monitors are the next generation of PMC’s Main Monitor series loudspeakers, featuring all new amplification, upgraded drivers, re-engineered cabinets, and PMC’s signature Advanced Transmission Line (ATL) technology.
PMC MB3 XBD-A
Featuring a second cabinet devoted exclusively to bass, with an additional single 12-inch Radial bass driver, the twin-cabinet MB3 XBD-A system offers still better dynamics than the MB3, with an additional 3dB of headroom below the bass crossover frequency of 380Hz, and allows larger rooms to be driven with an even smoother frequency response, producing a maximum SPL of 129dB. The twin XBD cabinets can be freestanding or soffit-mounted, and may be positioned vertically or side by side for greater flexibility. As with the MB3-A, a matching low-profile centre channel (MB3 XBD-C-A) is available for use in multi-channel arrays. Thanks to the wide-ranging frequency response of the twin-cabinet system, additional dedicated subwoofers are not a requirement.
• Type: 3-way ATL™ active reference monitor
• Frequency response: 20Hz-25kHz
• Power per channel: 3225W (HF 275W, MF 550W, LF & LFX 2400W)
• Effective ATL™ length: 2 x 3 metres
• Maximum SPL: 129dB
BB6 XBD-A
The twin-cabinet BB6 XBD-A extends the staggering performance specification of the BB6-A, taking distortion to new lows and pushing the maximum SPL output of this system to a powerful but tightly controlled 131dB thanks to its twin 15-inch Radial™ low-frequency drivers, and creating a smoother in-room response, even in the most expansive of listening environments. The BB6 XBD-C-A is available as the dedicated centre speaker for multi-channel systems, while the dedicated LFE inputs and effortlessly extended low-end response render stand-alone subwoofers unnecessary.
As with the MB3 XBD-A, the twin XBD cabinets can be freestanding or soffit-mounted, and positioned side by side or vertically. In the latter configuration, the BB6 XBD-A gives new meaning to the concept of the stand-alone tower speaker, reaching a height when floor-mounted of nearly seven feet.
• Type: 3-way ATL™ active reference monitor
• Frequency response: 17Hz-25kHz
• Power per channel: 5625W (HF 275W, MF 550W, 2 x LF 2400W)
• Effective ATL™ length: 2 x 4 metres
• Maximum SPL: 131dB